Our product can be applied to thermoplastic pipes like Type 20-32 and so on. It has such fine characteristics as accurate control of temperature, safety, and specialized Non-stuck plastics, easily operated by users.

1. Major Technical Standards

1.Using Conditions:≤1000 meters (Sea Level)

Environment Temperature:-20℃-50℃Relative Humidity:45%--95%Limited Power:110V; 50±1HZ

2.Heater Temperature: 260±5℃

3.safety Standard: insulating resistance ≥10MQ Leak electricity:≤5mA (AC effective)

2.Instructions∶

1.Fix

Fix the welding Apparatus together with its heater tip and put it on a shelf. Fix up a proper heating model, tighten it with an inside turret according to

the type of pipes needed.In general, the smaller lies in the front while the bigger,back.

2.Operation

Switch on the electricity to make sure the green light is on.The red light follows the green light, showing that the welding apparatus goes into the state of auto-control of temperature and then operate it. Warning: In an auto-control state, both the green and the red lights burns alternately, which

means it is under control.

3.Weld pipes

Cut off your pipe and put it with its fittings into the welding model, operate as the table bellows shows. When the heating time is up, take down from the model both the pipe and its fittings and straightly insert to the depth needed so that a flange can be seen at the joint.

App: If the temperature is  below 5℃, please heat it at extra 50%.

3.Warnings∶

1.Our product is used on nothing but the single 3-grade flat out let. When using, you have to use the outlet with a ground wire.

2.While using, keep off your hands and inflammables in case of any a ccident. 3.Never break it up unless you are technicians in case you are electrified and kept unsafe.

4.If the red and the green lights do not burn alternately for a time, there must be something wrong. Stop it and switch

off the electricity.

5.Turn to the technicians or its makers for repairs if something wrong. Never break it up at you will.

6.3-month repair for free is offered once.