Your shopping cart is empty!
※ Heating plate coating
Please take care on handling the heating plate. Keep a certain distance away from heating plate. Cleaning of its surface must be done with surface still warm by using a soft cloth or paper, avoid abrasive materials in that might damage the coating.
At regular intervals check as follows
1) Clean the surface by using a quick evaporation detergent (alcohol)
2) check the tightening of the screws and the cable and plug condition
3) Verify its surface temperature by using infrared-ray scanning
※ Milling cutter
It is strongly suggested to keep always clean the blades and wash the pulleys by using a detergent. At regular intervals, carry out a complete cleaning operation.
Type
φ250
Materials
PE, PP, PVDF
Max. Range Of Diameter
90 - 250 mm
Ambient Temp.
-5~40 ℃
Power Supply
220V ± 10%
Frequency
50 Hz
Total Power
4.2 kW
Include: Heating plate
2.35 kW
Milling Cutter Motor
1.1kW
Hydraulic Unit Motor
0.75 kW
Dielectric Resistance
>1MΩ
Max. Pressure
4.5MPa
Total Section Of Cylinders
11.16cm2
Hydraulic Oil
40~50 (kinematic viscosity) mm2/s, 40℃
Max. Temperature Of Heating Plate
270℃
Difference In Surface Temperature Of Heating Plate
±3℃
Basic Frame
Size, mm
930 × 580 × 560
Hydraulic Unit
815 × 550 × 660
Total Weight
W.G., kg
146
0 reviews / Write a review
{{ optionItem.label }}