Your shopping cart is empty!
※ Heating plate coating
Please take care on handling the heating plate. Keep a certain distance away from heating plate. Cleaning of its surface must be done with surface still warm by using a soft cloth or paper, avoid abrasive materials in that might damage the coating.
At regular intervals check as follows
1) Clean the surface by using a quick evaporation detergent (alcohol)
2) check the tightening of the screws and the cable and plug condition
3) Verify its surface temperature by using infrared-ray scanning
※ milling cutter
It is strongly suggested to keep always clean the blades and wash the pulleys by using a detergent. At regular intervals, carry out a complete cleaning operation.
Type
φ200
Materials
PE,PP,PVDF
Max. range of diameter
63-200 mm
Ambient temp.
-5~40℃
Power supply
220V±10 %
Frequency
50 Hz
Total power
3.55kW
Include:Heating plate
1.8kW
Milling cutter motor
1.0kW
Hydraulic unit motor
0.75 kW
Dielectric resistance
>1MΩ
Max. Pressure
4MPa
Total section of cylinders
15.3cm2
Hydraulic oil
40~50(kinematic viscosity)mm2/s, 40℃)
Max. Temperature of heating plate
299℃
Difference in surface temperature of heating plate
±3℃
Basic Frame
Size, mm
Hydraulic Unit
570 x 480 x 570
Total Weight
W.G., kg
66
0 reviews / Write a review
{{ optionItem.label }}