Foreign Trade Zone
B2B

  • Your shopping cart is empty!

About this product

1. Capacity is 573 lb
2. Effective machine volume: 318 ft3
3. Diameter of end disk is 25.6"
4. Productivity: 17857.5 lb/hour
5. Abrasive flow rate: 298 lb/min
6. efficiency 99.9% dust removal

1. Whole structure design. 3-phase electric connection can work. No need to debug.


2. Machine chamber use Mn13 plate. Small gap between rotary plate and side plate.


3. Air pressure pulse dust collector. Filter area 323ft². Dust discharge ≤ 10mg/m³.


4. Multiple seal. No steel ball fly out from the machine.


5. Blast wheel motor is 10HP. Investment casting(lost wax) wear parts. Surface HRC 62-65. Long life. Dynamic balance test. Lower noise.


6. Capacity 573 lb. 


7. Size L × W × H is 76.7" × 76.7" × 100.4".  


8. Worm gear reducer. More safety and stabilization.


9. Famous brand of electronic pneumatic component and mechanical parts. Lower failure rater and longer life.

Effective Machine Volume 318ft3
Diameter Of End Disk 25.6"
Distance Between The Barel Heads 35.4"
Maximum Recommended Weight Of Single Work-Piece 22lb, with a maximum load capacity of 537lb
Blastwheel 10hp blastwheel with a diameter of 14.2"
Footprint 78.7"(wide) x 70.9"(deep) x 102.4"(tall)
Electric Control System Operator control panel
Operating Voltage 460V, 60 Hz
Phase - Electrical 3-phase
Abrasive Flow Rate 298 lb/min
Productivity 17857.5 lb/hour
Rotating Speed Of The Barrel 14 r/min VFD
Velocity 1.46 inch/sec
Media Cleaning/Recycling System Bucket elevator with airwash separator
Initial Media Charge 331lb
Power Consumption 17hp
Mechanical Shaking Bag Type Dust Collector 2 pcs Bags with dimensions of 12.8" diameter x 39.4" long
Dust Particle Size 0.5 micron (.005mm)

Write a review

Please login or register to review

0 reviews / Write a review

{{ selectSpec[item.code]?.label }}

10HP Blastwheel Shot Blasting Machine 460V 3-phase

  • Model #: STAS31RA
  • Availability: Out of stock

  • $11,000.00


0 reviews / Write a review