YXQM-2L Lab High Energy Powder Grinding Equipment Vertical Nano Planetary Ball Mill

About this product

1. CE approved. The patented oil seal mute technology, PLC frequency conversion control, adopts the precision gear transmission designed by itself to replace the original belt transmission.

2. Two and four samples can be taken at a time, O-shaped sealed tank, safe operation, pressure resistance.

3. It is suitable for dry/wet/vacuum/protective atmosphere/low temperature/high temperature grinding to ensure the homogeneity and repeatability of the experiment and solve the deposition and adhesion problems of some materials.

4. The equipment is equipped with a safety switch and a safety automatic gear lock. There are universal wheels to push and run, and the equipment is safe and stable.

5. Low center of gravity, stable performance, compact structure, convenient operation, safe and reliable, low noise, no pollution, low loss.

If the appearance of the product has been upgraded, please refer to the actual product you received.

2L Planetary Ball Mill

Introducing the 2L Planetary Ball Mill, designed to meet your laboratory needs with ease. Boasting a sleek and sophisticated appearance, this product offers exceptional handling and impeccable performance.

It is used in colleges and universities, scientific research units and enterprise laboratories to quickly grind research samples to colloidal fineness in batches, and then mix, homogenize and disperse. Widely used in geological, mining, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, beauty, environmental protection and other scientific research and industrial sectors.

Control Panel

Our panel offers a range of adjustable settings to cater to your specific experimental needs. With the ability to control parameters such as adjustment speed, grinding plan, start and stop functions, and an emergency stop button, you can fine-tune the machine to suit your requirements.

This level of customization allows for precise control and accuracy, giving you the flexibility to optimize your experimental results.

Fine Grinding

Our 2L Planetary Ball Mill offers a diverse range of grinding methods to cater to your specific needs. Choose from dry grinding, wet grinding, high-temperature grinding, low-temperature grinding, vacuum grinding, and protective atmosphere grinding.

With such a comprehensive selection of grinding options, you can accurately tailor the machine's performance to achieve the desired results for your experimental needs. Further, the 2L Planetary Ball Mill's particle discharge size can reach as low as 0.1 um, ensuring unparalleled precision in your experiments.

Safety Device

Your safety is our top priority. Our instrument is equipped with safety features to prevent emergencies during experiments. In the event of an emergency or unforeseen circumstances, simply open the lid, and the machine will come to an immediate stop.

You can focus entirely on your research without worrying about any unexpected incidents that can potentially endanger you or your experiment.

Comes with 4 Nylon Holders

Our 2L planetary ball mill is a versatile piece of equipment that accommodates a wide range of jar sizes. You can use it with 250ml or 500ml jars, depending on your specific experimental needs. In addition, we've designed the mill to work seamlessly with 50ml and 100ml jars, thanks to the inclusion of four high-quality nylon holders.

With this level of flexibility and adaptability, you won't have to worry about purchasing additional equipment or switching between different machines during your experiments.

Frequency Conversion Control System

The main functions of the MITR planetary ball mill frequency conversion control system are as follows:

1. Forward operation: The planetary disk rotates clockwise.

2. Reverse rotation: The planetary disk rotates counterclockwise.

3. Alternate forward and reverse operation: The planetary disk rotates clockwise and counterclockwise alternately; the alternating forward and reverse operation can improve the uniform mixing and grinding effect of materials.

4. Forward and reverse alternate running time setting: You can set the forward running time and reverse running time.

5. Intermittent operation: The combined grinding method of static and grinding, this grinding method can properly precipitate and cool the material, which is very practical.

6. Intermittent running time setting: Set the static time and running time, which can be determined according to the nature of the material or experience.

7. Speed adjustment: Adjustment of running speed, stepless speed regulation.

8. Running time setting: The setting of the total running time, the maximum duration is 9999 minutes, and the recommended duration is less than or equal to 100 hours.

9. Running: When running, the device works according to the set program.

10. Pause: Stop when running.

11. Power failure memory point recovery: This function is a special function of Miqi planetary ball mill, accidental power failure recovery memory, starting grinding from the power failure point.

12. Safety switch: On/off of the flip safety switch, after setting, it will not affect the normal operation of the device when the flip is opened or closed.

13. Restore settings: Can restore factory settings.

After the control system program is set, the set function will be retained, and the next time it is turned on, it will run according to the last running program.

Name	Planetary ball mill
Model	YXQM-2L(Oil seal mute）
Field of Application	Pharmaceuticals, food, geology, metallurgy, agriculture, glass, ceramics, aviation chemicals, biology, materials, lithium power, electronics, plants, biology and so on.
Feed Material	Medium or low hardness, hard, brittle, fibrous, viscous.
Size Reduction Principle	Crushing, grinding, mixing, homogenization, alloying
Main Disk Structure	Planetary main disk gear invades and reinforces in lubricating oil, noise isolation treatment
Standard	CE
Electrical Description	110V, 60Hz, 1Ph. 1HP (0.75KW)
Material Feed Size	< 5 mm soil<10 mm
Final Fineness	< 100 nm
Batch Size / Feed Quantity	4 x 500 ml
Grinding Jar Sizes	50 ml /100 ml / 250 ml / 500 ml
Vacuum Jar Size	250 ml ( Stainless steel)
Feed Material Capacity	160 ml
Feed balls Capacity	160 ml
Sun Wheel Speed	10 - 400 r/min
Ball Mill Jar Speed	20 - 800 r/min
Total Grinding Speed	1200 /min
Speed Ratio	1:2
Material of Grinding Tools	Stainless steel, agate, zirconia, corundum, tungsten carbide, nylon, polyurethane, polytetrafluoroethylene, silicon carbide, etc.
Ball Size	1 / 2 / 3 / 5 / 8 / 10 / 15 / 20 / 25 / 30 mm
No. of Grinding Stations	2 or 4
Mode	Vertical planetary
Grinding Mode	Dry/wet
Low Temperature Cooling Treatment	Yes (air cooler added)
Oil Seal Position	The bottom of planetary main disk
Disk Dimensions	14 11/64" x 3 15/16" (360 x 100 mm)
Oil Seal Capacity	800ml(fill in before using the planetary ball mill)
Noise	< 60dB(Within 3 metre）
Protection Code	IP60
CN Patent	Safety protection (No.ZL 2015 2 0836150.6）
CN Patent	Oil seal silent (Patent No.ZL 2014 2 0375569.1）
CN Patent	Frequency control(patent No.ZL 2016 2 0836150.6）
W x H x D Closed	30 45/64" x 22 53/64" x 26 49/64" (780 x 580 x 680 mm)
Net Weight	242.5 lbs (110 kg)