Your shopping cart is empty!
1. [Key Parameter]: The measuring range of this Ku-3 viscometer is 40.2KU to 141.0KU, 32g to 1099g ( load), 27cp to 5250cp. The measurement accuracy is 1.5% of full-scale measurement. The stirring shaft speed is 200 r / min ± 1 r / min.
2. [Advanced Design]: This STM-IVB viscometer is equipped with the LCD digital display, which can directly display the temperture and viscometer by advanced microcomputer calculation technology. It is very easy to operate and obtain the necessary information.
3. [High Quality]: The main support of this intelligent viscometer adopts the high-quality aluminum alloy. The mixing blade and container adopts stainless steel, which can effectively resist corrosion. This ensures a long service life.
4. [Easy to Use]: Our liquid viscometer adopts the lifting system's design, which is easy to move up and down, and it is not easy to slip. Just put the sample in the containers, press the handle off and landing, obtain the measured value.
5. [Extensive Application]: This KU-3 viscometer is widely used to measure the viscosity of non-newtonian fluids, such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, biological fluids, rubber, mud, and pulp.
Ku-3 viscometer is used for the measurement of paint and other coatings used KU value that viscosity test equipment. The equipment can simultaneously show the sample viscosity KU value, CP (cps) g (grams), as well as at room temperature.
The apparatus by the microcomputer control. Mixing blades by special Constant speed motor drive to 200r/min rotational speed, mixing blades rotate in the sample resistance moment by computer conversion to KU value (Krebs K rebs) units (KU) generated 200 r/min rotational speed required to load a logarithmic function, the general used for the Brush and viscosity said. The operator simply mixing blades into the sample to the provisions of the depth, you can directly from the device to read the samples corresponding to KU value, CP (cps) g (grams).
The design of the machines based on ASTM-D562 standards and GB9269-88 standards.
Notice:
1. There are precision measuring parts in the cabinet of the instrument, which should be handled with care.
2. The instrument is a special instrument. If the special personnel do not open the instrument shell by themselves, it will not affect the measurement accuracy of the instrument.
3. When the instrument is not in use temporarily, the lifting handle of the instrument should be kept on the high limit device instead of at a lower position, otherwise the lifting and lowering may be inflexible.
4. It is necessary to come to the company for inspection once a year, or send it to the relevant measurement supervision department for testing once.
Package Contents
0 reviews / Write a review
{{ optionItem.label }}