Your shopping cart is empty!
The control system
1. Control method: balance temperature and humidity control system (BTHC), control SSR with P.I.D, so that the heating and humidification amount of the system is equal to the heat and moisture loss, so it can work stably for a long time.
2. Temperature and humidity controller: Korean color imported "E-600" Chinese and English interface, data and data screen display and conversation mode, temperature and humidity controller, single point and programmable control, screen backlight adjustable.
1) Resolution: 0.01℃, 0.01%R.H
2) Temperature range: -100℃~+200℃
3) Humidity range: 10%~99.9%R.H
4) Number of program segments: 120 programs with 1200 segments memory
5) Each segment can set temperature, humidity and time at the same time, and it can run 999 times repeatedly
6) Program operation has functions such as standby, skip and hold
7) With fixed value timing stop and program end functions
8) With the function of scheduled start and stop and fault prompt
9) Thermometer: 2 PT-100
10) The main components of each system are equipped with a safety detection interface device. When an abnormal fault occurs, the fault status is immediately displayed on the screen and the power supply is cut off.
1. Inner box size: H500×W500×D400 (mm)
2. Outer box size: H1700×W1050×D900 (mm)
3. Inner box material: SUS#304 mirror stainless steel plate
4. Outer box material: baking varnish.
5. Thermal insulation layer: high-density rigid PU foam rubber and 24K glass wool
6. Machine tripod: the furnace bottom is equipped with 4 movable wheels and 4 flat feet
7. Box door:1) Single door, open the door on the left, the handle is on the left,2) Window 280×300×35mm multilayer high-definition electric heating defogging tempered glass3) 11W imported fluorescent lamp is installed in the box
8. Transport fan: 60W extended shaft motor with two sets of multi-wing wind wheels
9. Heater: fin-type radiating tube-shaped stainless steel electric heater
10. Furnace accessories: 2 sets of adjustable layer formats, with 2 stainless steel racks
11. Test hole: 1 ø50mm hole on the left side of the fuselage and 1 stainless steel cover
12. Control panel: Illuminated press button switch 2 pcs; 1 temperature and humidity controller; 1 power switch
13, water tank:1 built-in 24L stainless steel water tank with water added to the front; 1 set of automatic water supply pump, automatically supply water from the water tank to humidification and wet bulb water;1 set of water shortage alarm device
0 reviews / Write a review
{{ optionItem.label }}