Your shopping cart is empty!
1. Check that the parts at the mouthof hydraulic crimper can freely move. Periodically check that all the pipes, axes, and screws are not damaged. Any damaged part must be replaced withoriginal part by the authorized technician.
2. After that, the hydraulic crimpershall be thoroughly cleaned. All the moving parts are greased only with premiumhydraulic oil or ball bearing oil.
3. The hydraulic crimper, which haveundergone 20000 crimping operations or have been used for two years, whicheveris earlier, must be maintained by the authorized repair shop or our company.
4. The hydraulic crimper are sent onlyafter hydraulic oil must be thoroughly drained from them.
5. Associated hydraulic oil: HB30(acidnumber: 0.81 mg KOH/g) 57ml
Crimp Size:
6-12mm
Dies:
7 sets of dies (The following table)
Material:
Stainless steel
Technical Parameters:
Quenching, HRC 40-45, Black surface treatment
Weight:
12kgs
NO.
Hose Specification Given Conditions
Hose Size Inner Diameter
Hose Size Outer Diameter
Hose Fitting Outer Diameter
Remark
6SRB
5/16",DN8
Φ8±0.4
Φ14.5 ~ 16.5
Aluminium joint φ19.5
Steel joint φ17.5
Dn8 Thin-wall hose
8SRB,6
Φ18.5 ~ 20.5
Aluminium joint φ23.5
Steel joint φ21.5
13/32", 3/8",DN10
Φ10 ~ 11.5
Φ16.5 ~ 20.5
Dn10 Thin-wall hose
8
13/13",DN10
Φ10 ~ 10.5
Φ22 ~ 23.5
Aluminium joint φ26.5
Steel joint φ24.6
10SRB
1/2",DN13
Φ12.4 ~ 13.5
Φ19.5 ~ 22
Aluminium joint φ25
Dn13 Thin-wall hose
10
Φ23 ~ 25.5
Aluminium joint φ27.7
Steel joint φ25.5
12SRB
5/8",DN16
Φ14.8 ~ 16
Φ22.5 ~ 25
Aluminium joint φ27.8
Dn16 Thin-wall hose
12
Φ15 ~ 16.5
Φ28 ~ 29.5
Aluminium joint φ32.5
0 reviews / Write a review
{{ optionItem.label }}