Your shopping cart is empty!
Excellent for high dust load, high temperature, and product recovery applications
Can be used alone, with optional bag filter assembly, or as a pre-cleaner
Applications from 510 to 22,082 m³/h / 300 to 13,000 cfm
Heavy-duty construction for long life and low maintenance
Meets seismic zone 6.4 and 160.9 km/h / 4 and 100 mph wind load ratings
Economical, Centrifugal Separator for High-Volume Dust
The Donaldson Torit® Cyclone dust collector is designed specifically for high dust load, high temperature, and product recovery applications. It has a mechanical separator that uses centrifugal force to remove dust particulates from the air in industrial applications. Dusty air enters the cyclone and the dust particles travel around the inner wall of the cyclone. As the particles lose their velocity, they drop lower in the cyclone until they drop into the receptical below.
An economical solution to a wide range of dust collection problems
Removable cone section for easy replacement
Operational Explanation
Dust-laden air enters the unit through the air inlet and is diverted by a helical baffle. Centrifugal force moves the heavy dust to the interior sidewalls and carries them to the base of the unit. Clean air is carried through the inner cylinder and discharges to atmosphere or optional afterfilters.
Model
Nominal Airflow Range* (cfm)
Nominal Airflow Range* (m3/h)
External Static Pressure ("wg)
Inlet Velocity (fpm)
Inlet Velocity (m/min)
20-5
1500 - 2500
2,548 - 4,247
11.4 - 5.0
4290 - 7140
1307.6 - 2176.3
Shipping Weight: 640 lbs.
Includes:
All welded construction
208/230/460V, 60Hz, 3 Phase
TEFC*
55 Gal. Drum Base with Flex Hose and Drum Cover
*All 60 Hz motors 1 HP and above are EISA compliant and considered NEMA Premium® per Table 12-12. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.
0 reviews / Write a review
{{ optionItem.label }}