Your shopping cart is empty!
MADE IN THE USA<
Capture-at-source for Cleaner AirUltrasonic sensor adds water during operationComplies with NFPA guidelines for Combustible Dust
The WX-6500 stainless steel wet dust collector provides a solution for the safe collection of combustible metal dust. These wet type dust collectors can also be used in applications too tough or unsuitable for traditional cartridge style dust collectors.
The wet collector continuously and violently intermixes water with the incoming airstream, separating dust using centrifugal force and trapping dust particles into water droplets. The mist eliminator filter prevents water vapor from leaving the exhaust. Finally, the dust settles in the bottom of the collector as sludge where it can be cleaned out, separated and the water can be filtered and reused.
Diversitech’s wet collectors provide high efficiency and low maintenance costs since wet collectors do not require costly filter replacement like traditional dust collectors. Many competitive manufacturers offer wet dust collectors in tar or epoxy coated steel construction which is susceptible to rusting and corrosion over time. Diversitech only manufactures wet dust collectors in stainless steel to ensure your wet collector can provide years of dependable service.
NFPA 484 Compliant
In 2015, NFPA updated the 484 standards requiring an interlocked offline vent fan, to prevent a build-up of hydrogen gas. Optional HEPA filters also now require a high-temperature alert. Diversitech's CSA/UL certified control panel now supports:
- Offline Vent Fan included
- HEPA Filter high-temperature alert (option)
100% Duty Cycle
The WX Collector's new ultrasonic water sensor monitors and automatically adds water as needed, even while the machine is in operation.
- Oline adaptive water-level control
- Automatically adds water, offline & online
- Safety overflow drain
Benefits:
- Capture-at-source for Cleaner Air
- Complies with NFPA guidelines for Combustible Dust
Features:
- Ultrasonic water level sensor
- NEMA 4x control panel w/LCD display
- Mainline Interlock Switch
- Anti-Corrosion stainless steel #304 construction
- High efficiency, non-sparking blower wheel
- Transparent Lexan doors, with easy access clasps
- Low-cost mist eliminator after filters
Ideal Applications:
- Aluminum
- Magnesium
- Titanium
- Grinding & Deburring
- Sanding & Finishing
- Powder Mixing
- Buffing & Polishing
- Wide Belt Sanding
1. Water Level is marked on each unit.
1. For 1200, Airflow @ 2" external static pressure
2. For WX-3000, WX-5000, WX-6500, Airflow @ 2.5" external static pressure
0 reviews / Write a review
{{ optionItem.label }}