FAQ 

Here we list some frequently asked questions and answers relating to 

CReaderVI. 

Question: System halts when reading data stream. What is the reason? 

Answer: It may be caused by a slackened connector. Please turn off the 

Creader VI, firmly connect the connector, and switch on it again. 

Question: Screen of main unit flashes at engine ignition start.

Answer: Caused by electromagnetic disturbing, and this is normal 

phenomenon. 

Question: There is no response when communicating with on-board 

computer. 

Answer: Please confirm the proper voltage of power supply and check if the 

throttle has been closed, the transmission is in the neutral position, and the 

water is in proper temperature. 

Question: Why are there so many fault codes? 

Answer: Usually, it’s caused by poor connection or fault circuit grounding.

An automotive diagnostic tool for everyone.

² Insert CReader VI into the OBDII receptacle to read and erase troubled code and identify the cause of check light engine.

² Data stream and I/M Readiness shown in graphic forms help you decide whether your car is ready for emission test.

² Universally compatible with all vehicles in compliance with OBDII, EOBD, and CAN protocols. Works perfectly on American cars manufactured since 1996, European cars manufactured since 2001, and all Asian cars.

² The built-in DTC (diagnostic trouble code)dictionarydefines the codes automatically.

² A 2.8-inch colorful screen supports multi-language display. The supported languages include English, French, and German in original factory settings. Upgrade the software to get more languages available.

² Full OBDII functions, including reading automotive information,O2 sensor test, EVAP system test, reading current, pending and permanent DTCs, etc.

² Lifetime free upgrade promised by Launch to make sure test results are accurate and trustworthy.

Brand History

Founded in 1992, Launch Tech Co., Ltd. is a leading manufacturer of professional diagnostic tools and equipment in the automotive aftermarket. With 25 years of devotion and efforts, we have created a huge and loyal customer base in the whole world.

Globally, Launchnow has a subsidiary in Germany and hundreds of dealers in Asia,Europe, Oceania, and North America.

User-Friendly Display

The colorful screen displaystexts and graphs simultaneously with a refreshing rate of 2 frames/sec to prevent you missing any diagnostic results.

Emission Test

The I/M readiness test indicates whether the emissions-related systems are operating well and ready for inspection.

Build-in DTC Lookup

Built-in DTC lookup library defines the codes directly. Thus, you don’t have to look them up by yourself.

Universal Compatibility

Works on cars, SUVs, and light trucks (12V only) manufactured in 1996 and later, in USA or abroad.

As a flagship product of Launch Handheld Diagnostic Toolseries, CReader VI is afunctionally powerful, affordable tool that has gained popularity around the world.In 2018, Launch upgraded the whole configuration of CReader VI to make it feature full OBDII functions for DIY enthusiasts and whose who want to save money from car repair stores.

Package : 1 x LAUNCH Creader VI OBD II Scanner 1 x USB Cable 1 x User Manual

Accessories Included 

1) User's Manual -- Instructions on tool operations 

2) USB cable--Connect to a computer for upgrading online

CReader VI 2018 is a car code reader for all drivers. It is applicable to all OBD2/EOBD-based vehicles in 1996 (or later), and complies with all OBD2 protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network).

Promptly Reads and erases DTC (engine fault codes) and accesses emissions readiness status. The on-screen DTC definitions and built-in DTC library allow you to correctly find out the cause of the check engine light and turn off the MIL (Malfunction Indicator Lamp).

Live vehicle sensor data displayed in text and graph helps you focus on suspicious or symptom-specific data parameters and notifies if the emission-related systems are operating properly or ready for inspection.

Supports all OBD2 functions: retrieve generic manufacturer specific codes and pending codes, O2 Sensor test, EVAP system test, live data stream, and view freeze frame data.

2.4-inch color display supports multiple languages. 3.3-foot flexible connector. Plug and use, no battery needed. One-year product warranty and lifetime software upgrades