B2B

  • Your shopping cart is empty!

About this product
1. Input (50 / 60Hz, 1ph): 110V, 6.3A
2. Weight: 4lb
3. Wattage: 1000W
4. Package Include:
Magnetic Induction Heater × 1
Φ15mm Coil × 1
Φ20mm Coil × 1
Φ30mm Coil × 1
1. Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out.
2. Covered terminals for superior safety protection.
3. Improved ergonomics with a granular slip resistant handle, and work area with high illumination (LED).
4. Will heat through rubber or plastic.Equipped with fan cooling and thermal protection.Will not damage nearby heat sensitive parts.
5. By using the eletromagnetic fields to heat the ferrous and non ferrous metals, induction heater can turn a 3/4 nut cherry red in 15 seconds, which is faster and more precise and efficient than oxy-acetylene system, no open flame cause by the heating, to ensure your working environment in safe.
 

Using range

 
● Strip Paint.
● Metal Shrinking.
● Loosen tie-rod ends.
● Paintless dent repair.
● Bending and Forming.
● Removal of old body filler.
● Spray-in bed liner removal.
● Flameless frame rail heating.
● Shrink fit bearings and gears.
● Debond rearview mirror brackets.
● Caulking and seam sealer removal.
● Remove and loose core support labels.
● Rapidly cure panel bonding adheasive.
● Instantly cure high solids 1k and 2k primers.
● Easily remove after market chrome rocker panels.
● Easily remove bonded roof panels and other SMC's.
● Remove vinyl stripes without solvent or rubber wheels.
● Remove and loose serial number labels located in door jams.
● Solder large electrical connectors as found on hybrid vehicles.
● Easily remove torx bolt found in truck bed boxes and seat belts.
● Remove and loose underhood labels for belt, hose and AC routing.
● Remove and loose OE and aftermarket fender flares... re-use the original tape.
● Vinyl black trim removal from upper door frames between front and rear windows.
● Remove and loose plastic vent shades, while removing all the tape from the vehicle.
● Loosen studs with thread locking compounds lie the ones holding roof racks in place.
● Thermally expand bearings and pulleys for easy installation, eliminating the need to press them on.

Write a review

Please login or register to review

0 reviews / Write a review

{{ selectSpec[item.code]?.label }}

Magnetic Induction Heater Kit 1000W 110V For Automotive Flameless

  • Model #: MKR3JG7K
  • Availability: Out of stock
  • WARRANTY: 90-Days

  • $187.11


0 reviews / Write a review