Your shopping cart is empty!
2. Working Voltage: AC110V±10% 60hz
3. Co2 Laser Power: RECI W2 90~100W 10000 Hours Life Time. 18 Months Warrantied According Lable on Laser Tube
4. 3 Phase Leadshine Stepping Motor And Driver High Precision Low Noise
5. Taiwan Made HIWIN Linear Guide Rails High Precision And Durable
6. IIVI ZNSE Focus Lens
8. CW5000 Industrial Water Chiller Included
9. Aluminium Blade Table And Honeycomb Table Which Could Up And Down >9.84"(25cm)
Laser Machine Dimension
1. MACHINE BODY >>>
This laser cutting machine could be split into two layers and could pass through 33.46"( 85cm )door.
2. FOMA WHEEL >>>
Quiet ,easier to move,strong load-bearing capacity and long service life
3.1 FRONT AND BACK ACCESS DOOR >>>
The front and back access door can be opened ,and the materials can pass through the door ,so that it is very convenient for processing longer materials.
3.2 WINDOWS >>>
Specially designed 3 acrylic transparent windows, which greatly facilitates users to check the working condition of the laser cutting machine.
4. CONTROL SYSTEM >>>
DSP offline laser engraving & cutting controller RDC6445G; Smart touch screen panel, Full functioning,Convenient and efficient ,Easy to use
5. LASER HEAD >>>
High-quality laser head, adopting flight light path design, unique optical structure design, small optical path deviation, high stability and convenient adjustment.
Auxiliary blowing system, which quickly reduces the temperature of the material cutting part and prevents the material from smearing and cutting the deformation
6. LASER TUBE >>>
High Quality W2 RECI LASER TUBE with 10000 hours life time: Available for global warranty;
7. WATER CHILLER >>>
CW5000 water chiller efficient refrigeration ,effectively cooling the laser tube ,ensuring the safe operation of the laser tube and prolonging the service life of the laser tube
8. STEPPER MOTOR >>>
Leadshine 3 phase stepper motor , stable and safe performance,high torque ,high precision, low noise and low heat .
ssipate heat for the distribution box and protect electrical components
Leakage protector to ensure work safety;
Multiple sockets for powering exhaust fans, air pumps and water chiller, making it more convenient to use
9.FOCUS LENS >>>
Diameter:20mm, focus Length:63.5mm
US imports of substrates,Edge polishing, high light transmittance,Reinforced coating process, durable and difficult to remove film,After focusing, the spot is fine, and the cutting and engraving effect is very good.
10. LINEAR GUIDE RAILS>>>>
TAIWAN made liner guide rails ,Rugged and durable, low friction, low running resistance,Can effectively improve work efficiency,Low environmental requirements ,Works in harsh environments
11.DOUBLE MOTOR DRIVE ELECTRIC LIFTING PLATFORM >>>>
Double stepper motor which supply strong power for up and down the worktable (worktable can be up and down > 9.84" (25cm) , Suitable for workpieces processing at different heights, with a wider processing range The electric focusing speed is fast, which improves work efficiency. Belts electric lifting, high precision and low noise.
According to different processing materials, this laser machine is equipped with two common work tables, which are convenient for customers to use for multiple purposes.
12. HONEYCOMB TABLE>>>>
Suitable for soft and small material processing,such as leather, clothes, fabric, paper ect
13. ALUMINIUM BLADE WORKTABLE >>>>
Suitable for hard and large materials, such as acrylic wood
14. 1 LED LIGHT >>>>
Install LED lights above the work platform, Illuminate the work area, it can see the work situation more clearly, and it is beneficial to control the work progress and processing quality.
14. 2 RED LIGHT POSITIONING >>>>
Use red light as an indicator to confirm the location of the working
14.3 LIMIT SWITCH >>>>
A limit switch is installed at the end of the X Y axis to prevent collision and protect the machine.
15. ELECTRONIC DEVICES AND WIRING>>>
The layout of electronic devices is scientific and reasonable to prevent mutual interference with each other;
The wiring is professional and firm, clean and tidy, and the conduction quality is high.
16.1 EMERGENCY STOP SWITCH>>>>
The machine has abnormal operation, it can start the emergency stop switch, stop the work, and protect the machine.
16.2 COOLING FAN>>>>
Dissipate heat for the distribution box and protect electrical components
16.3 LEAKAGE PROTECTOR >>>>
16.4 MULTIPLE SOCKETS>>>>
17.FUNNEL WASTE COLLECTION DRAWER>>>>
Waste materials fall into the drawer, easy and quick to clean up
Limited Switch USB Cable Sensor cable for chiller Power Cable Inner Hexagon Wrench
Network cable Ruler Water Pipe Clamp Focal length Ruler
Documents Bag Double-sided adhesive and Acrylic sheetsfor light path adjustment
Model
9060
Focus lens
USA imported D20mm/FCL63.5mm
Power supply
AC110V±10% 60hz
Working area
Laser heads quantity
1
Laser power
RECI W2 90-100W
Max moving speed
800mm/s
Laser energy control
1-100% set by hand or software
Working table
Double table(Aluminum knife table+Honeycomb working table)
Locating precision
<0.01mm
Min shaping character
letter 0.5mm, Chinese 0.5mm
Operating temperature
-5℃-35℃
Resolution ratio
4500dpi
Control program
RDWORKS
Data transfer interface
USB
System environment
Win7/8/10
Cooling way
Chiller CW5200 with protection system
Graphic format supported
The file which Corel Draw, Photo shop, Auto-CAD can identify
Compatible software
Corel Draw, Auto-CAD
Cutting thickness
0-20 mm (depends on different materials)
Color separation
Separation of cutting up to 256 colors
Sloping engraving
yes
Red dot pointer
Open door safety
Packing
Plywood case
Package dimension
23.62" x17.72"X20.87" (60x45x53cm)
Net weight
770LB
gross weight
990LB
0 reviews / Write a review
{{ optionItem.label }}
$499.00