Hydraulic Gear Puller Bearing Wheel Pulling 2 or 3 Jaws set 20 tons

Bolton Tools 20 Tons Hydraulic Gear Puller Bearing Wheel Pulling 2 or 3 Jaws

$228.85 $269.24

Model #: LCP7W7B2
WARRANTY: 90-Days

About this item

1. It is mainly disassembled the bearing and shaft tool and also can be remove all kinds of mechanical equipment of pulley, gears, bearings and so on.

2. Body once forming: High Carbon Steel Material, the whole seamless, smooth shape, use for a long time, the cylinder will not crack, oil leakage.

Jaws: Made of alloy steel and are durable after heat treatment.

3. 3 and 2 jaws can be assembled freely. Can be used vertically and horizontally, easy to operate without site restriction.

4. Piston: Up and down move the handle, piston starter rod extends smoothly under the action of oil pressure.

5. Handle: Thickened rubber sleeve, soft and comfortable texture.

$228.85 $269.24

Out of Stock

Qty

Product Description

Work Principle

Hydraulic Gear Puller moves ahead directly by the hydraulic starter pole, so the handspike don’t turn by itself. The alcula- pedestal adjusts the distance for go ahead and back off go with the screw thread. When operate it, just need the handle wiggles fore-and-aft in small range, the hydraulic starter pole move ahead and at the same time, the alcula back off induce the pulling object pull off.

Use method and notice proceeding

1.Turn tighten the return-oil valve clockwise firstly.

2.Adjust the alcula- pedestal to tackle the pulling object.

3.Start the piston starter-pole goes ahead smoothly, alcula-pedestal goes off and the pulling object pulled out.

4.In order to make the piston starter pole back off, just need to loosen the return-oil valves lightly with anticlockwise at the handle notch. The piston starter-pole withdraws bit by bit in the function of the spring.

5.Estimate the force before pull the object in order to choose the available standard hydraulic gear puller. Strictly prohibit over burden use to avoid damage.

6.This hydraulic gear puller at temperature –5dcs to +45dcs, and uses (GB443-84) N15 machine oil; and at –20dcs to –5dcs, uses (GB442-64) compound spindle oil. And the work oil must be cleaned.

Product Information

Technical Details

SPECS
Output	20 tons
Max Stroke	2.95 in
Claw Number	3
Max Horizontal Distance	11.81 in
Max Verticle Distance	5.51 in
Weight	30.86 lb

Attachment

Hydraulic puller