10 Tons Hydraulic Cylinder Jack+ Hydraulic Manual Pump with 14 fl oz Oil Capacity, 2 Inches Stroke Hydraulic Cylinder and Pump Combination

About this product

1. The hydraulic cylinder has 10 tons lifting capacity with a stroke of 2''. It's durable and of high-performance.

2. The max. output pressure of the pump is 10,000 PSI, and it is painted with lacquer to prevent from rusting.

3. The size of the male Connector and female connector are both ZG 3/8'' NPT standard coupler, and both are with anti-dust cover.

4. This set is portable and easy to carry home, which can be fit in poky space and applicable in various situations.

5. the oil cylinder is high-quality, painted with lacquer to prevent the jack from rusting and the piston is covered with a layer of chrome.

10 Tons Hydraulic Cylinder Jack+ Hydraulic Manual Pump

· The piston will retract automatically when released the pressure.

· After use, always fully retract the piston.

· Always fully support the base of the cylinder.

· Avoid lifting loads that are not the center of the piston.

· When hoses are disconnected, always put the anti-dust cover on the connector.

· Always use genuine Hi-Force hydraulic oil. The use of other fluids may invalidate your warranty.

For more instructions, please read the manual provided.

Pump with Male Connector: ZG 3/8'' NPT standard coupler with anti-dust cover

The pump is portable of the weight 11lbs. and in the size of : 14'' x 5'' x 6'' . The oil capacity is 14 fl oz with a 39'' hose (Included)

Max. Output Pressure of 10,000 PSI, and it is painted with lacquer to prevent rusting

The hydraulic cylinder has 10 tons lifting capacity with a stroke of 2''. It is carry-home size with 4.63 lbs in weight and 3.74'' in height.

The female connector is ZG 3/8'' NPT standard coupler with anti-dust cover.

Model	CP180
Max. Output Pressure	10000 PSI
Oil Deposited	14 fl oz = 400 ml
Product Size	14'' x 5'' x 6'' (350 x 120 x 150 mm)
Weight	11LB
Port Size	PT3/8 thread with Male connector
Hose Length	39'' (1m)

{{ item.label }}: {{ selectSpec[item.code]?.label }}

Qty