About this product

1. It can be dust-proof

2. The 50-gallon liquid oil can be pumped to the bottom

3. The output can be stopped at any time by increasing the output switch

4. The handle can be used manually when the pumping amount is small

5. After compliance, the outlet of the oil pipe can be rotated 180 degrees upward, which can prevent the oil from dripping to the ground to a minimum (Based on the environmental protection economy)

50 Gal Pneumatic Oil Pump Made In Taiwan

1. After compliance, the outlet of the oil pipe can be rotated 180 degrees upward, which can prevent the oil from dripping to the ground to a minimum (Based on the environmental protection economy)

2. The output can be stopped at any time by increasing the output switch.

3. The 50-gallon liquid oil can be pumped to the bottom

4. The "oil barrel screw" can be set to fix the oil barrel to prevent the whole extractor from shaking when the oil handle is in use.

5. The handle can be used manually when the pumping amount is small

6. Large pumping capacity can be connected to an air compressor

7. It can be dust-proof.

Model	PD023-2-1
For Use With	Machine oil, lube oil, and more
Works With	50 and 55-gallon drums
Output	600ml per stroke
Inlet Port ( inch)	1 1/2"
Outlet Port ( inch)	7/8"
Material	Stainless Steel, Aluminum
Overall height ( inch)	45 ⁹/₃₂"
Width( inch )	14"
Country Of Origin	Taiwan