Specification
1. Door Height:
For door up to 7'0" standard.
2. Door Width :
For door 2'6" to 3'0" standard.
3. Stile :
4-1/4"min.
4. Mounting Height: 40-5/16" from CL to finished
floor recommended.
5. Mounting:
Furnished standard with sheet metal & machine screws and SNB
6.Cylinders:
6-pin standard.
7 Dogging:
1/4" turn, hex key dogging.
8. U.L. Listed:
For "Panic Hardware", ANSI Grade 2.
9.Operation:
Exit by slight pressure on any point on the push bar at all time.
10. Material :
Push bar of extruded anodized aluminum, spring of stainless steel.
11. Latch Bolts:
3/4" throw, stainless steel.
12. Dead Latch Bolts: 5/8", stainless steel.
13. Finish:
Push bar-anodized, cover-painted.
14.Strike:
For 5/8" stop, plus shim for 1/2" stop.
15.Protection:
2-1/2" maximum, 1-7/8" depressed.
16.Reversible:
Non-handed. Reversible for all functions and trims
17. For Door:
1-3/4" thick standard. Specify if other than 1-3/4" trims.
18.Backset:
2-3/4".
19.Top Latchbolt: 3/4" throw,
stainless steel.
20. Top Deadbolt: 1/2" throw, steel
bolt.
21. Bottom Latchbolt: 3/4" throw, stainless steel.
22.Case Qty: 4.
¡¡
Case Qty: 4
